What you get from Mission Plumbing, Heating & Cooling:
Yes, actually, water heaters can explode! Anything that causes excess pressure on your water heater, such as a poor anode rod or excess sediment buildup, could potentially cause a water heater explosion.
The most common problem with water heaters is usually the water tank producing too little hot water. This can be solved by turning up the temperature on the tank’s thermostat. Be careful, however, not to turn the temperature up too high, as this can produce scalding hot water.
On average, replacing a gas or electric water heater with a similar model takes around two to three hours. The process usually takes between 45 to 60 minutes to drain, disconnect, and remove your old water heater.
If you are unsure whether it’s time to replace your water heater, there are a few main points to keep in mind when making your decision:
![a tankless & tanked water heater in a [primary_location] home](https://www.missionphc.com/wp-content/uploads/2026/09/Water-Heater-install.webp)
At Mission Plumbing, Heating & Cooling, we are committed to ensuring that individuals with disabilities enjoy full access to our websites. In recognition of this commitment, we are in the process of making modifications to increase the accessibility and usability of this website, using the relevant portions of the Web Content Accessibility Guidelines 2.0 (WCAG 2.0) as our standard. Please be aware that our efforts are ongoing. If at any time you have difficulty using this website or with a particular web page or function on this site, please contact us by phone at (913) 382-2451; or email us at ([email protected]) and place “Web Content Accessibility (ADA)” in the subject heading and we will make all reasonable efforts to assist you.
